Skip to content 
Polished Concrete Floors
Polished Concrete in Mississauga
Quick F/X Epoxy grinds, densifies and polishes concrete floors for stores, restaurants, warehouses, schools and other commercial, industrial and institutional buildings across Southern Ontario. Concrete polishing turns the existing slab into a hard-wearing, easy-clean finished floor, with no coating on top to peel.
get a free quote
Enter your contact information below
Concrete Polishing &
Polished Floors
No coating
to peel
Unmatched Quality
& Craftsmanship
5-Star Reviews on
google reviews
Mississauga Concrete Polishing for Plants, Dealerships and Schools
Most working floors in Mississauga are concrete slabs, and polishing finishes the floor that was poured instead of covering it. The slab is ground, densified and polished in stages to a sheen from satin to high gloss. It fits the dealerships and stores along Dundas Street and Dixie Road, the office parks on Matheson Boulevard, the manufacturing plants off Mavis Road and Argentia Road, and the aviation buildings on the airport lands.
The result of polished concrete is a smooth floor that bounces light around, keeps dust down and is cleaned with a dust mop and a damp mop. Quick F/X Epoxy brings that work to buildings across Mississauga, and our own crew does it.
Why Choose Polished Concrete Floors
01
Hard-Wearing Surface
Densified, polished concrete stands up to heavy foot traffic, carts and rolling loads, and there is no coating on top that can chip or peel.
02
Easy to Keep Clean
A polished slab is smooth and tight, so a dust mop and a damp mop with a neutral cleaner are usually all it needs.
03
Less Concrete Dust
Densifying hardens the top of the slab, which cuts down the fine dust that bare concrete keeps shedding.
04
Brighter Spaces
The polished surface reflects light, which helps sales floors, showrooms, corridors and warehouse aisles feel brighter.
05
Your Choice of Sheen
Choose how much shine the floor has, from a soft satin to a high gloss, to suit the space and how it is lit.
Choose Your Polished Concrete Finish
A
Class A: Cream Finish
Only the very top of the slab is ground away, about 1/32 to 1/64 inch, so the surface stays mostly cement paste (roughly 85% to 95%) and barely any stone shows. The result is an even, plain colour for clean, contemporary interiors.
B
Class B: Salt and Pepper
Taking off around 1/16 inch reveals the sand and small stones just under the surface, giving the floor a fine, speckled pattern. It is an understated look that works on most commercial floors.
C
Class C: Coarse Aggregate
A deeper grind exposes the larger stones in the slab for a bold, terrazzo-like look. Which stones show depends on the original pour, so every floor is a little different.
Polished Concrete for Mississauga Schools, Restaurants and Hangars
In schools and healthcare facilities the appeal is a long, continuous floor that is hard, low in dust and simple to mop. In restaurants, bars and shopping malls it is a bright, light-reflecting look across the whole room, and in factories, warehouses and hangars it is a tough polished concrete surface wherever the slab is already good.
Choose a satin or a high gloss, and cream, salt-and-pepper or exposed aggregate. If you want a floor of new chips set in a binder instead, that is terrazzo, while polishing grinds the slab you already have.
Slabs that are very soft or badly damaged may not suit polishing. Where oil, chemicals or standing water are regular, epoxy is the better choice, as with our industrial and commercial floors in Mississauga. Quick F/X Epoxy preps the concrete first.
Why Mississauga Owners and Facility Managers Trust Quick F/X Epoxy With Their Slab
Good polishing depends on what happens before the first polishing pad touches the floor: hardness and moisture checks, diamond grinding, and filling cracks and joints. Jay, our founder, takes the first call, writes the quote and does the final walkthrough, and the crew is ours rather than subcontracted. You get a straight written quote and a start date we agree together.
Our Concrete Polishing Process
01
Free Quote for Your Floor
Tell us about the building, the floor area and how it is used, and send a few photos. We tell you whether the slab suits polishing or whether epoxy is the better choice, and come back with a clear quote.
02
Check the Slab
We check the concrete for hardness, cracks, joints and any old adhesive or coating that has to come off, then agree the finish and the timing with you.
03
Diamond Grinding
The slab is ground flat with diamond tooling to the look you chose, from a smooth cream finish to exposed aggregate, and cracks and joints are filled.
04
Densify and Polish
A densifier is worked into the concrete to harden the surface, then the floor is honed and polished through finer diamonds to the sheen agreed for the space.
05
Guard and Walkthrough
A penetrating guard goes on to help the floor resist stains. We walk the finished floor with you and explain the simple cleaning routine that keeps it looking good.
Frequently asked questions
Can a Mississauga factory or plant have its floor polished?
Will a Mississauga car dealership floor polish to a high gloss?
Is my Mississauga slab good enough for polished concrete floors?
Can you polish a Mississauga school or clinic in stages?
Request Your Mississauga Concrete Polishing Quote
Send us the street or district, what the building is used for, roughly how large the floor is and a few photos of the concrete. You will get a straight written quote back, with the timing agreed in advance.
Areas We Serve Across Ontario
Toronto
Mississauga
Brampton
Vaughan
Markham
Richmond Hill
Oakville
Burlington
Hamilton
Pickering
Ajax
Oshawa
Scarborough
Milton
Niagara
St. Catharines
Halton Hills
North York
Guelph
Kitchener
Waterloo
Collingwood
Cambridge
Brantford
London
Middlesex
Stratford
Barrie
Meaford
Newmarket
Ottawa
All Service Areas
If you don’t see your location listed? Get in touch